Remote Sleeve Mount — Customizable 3D Printed Product | The Object Center

Remote Sleeve Mount

Keep your remote close with a minimal adhesive sleeve mount. Modeled from the studio’s Remote Holder Rhino reference: choose a suggested remote or enter its width and thickness. Mount on a wall, monitor back or desk side with suitable adhesive tape (not included). Presets are manufacturer dimensions, not verified fit tests; measure the body where it enters the sleeve, including any case. The straight cavity is 2 mm wider and thicker than the selected remote dimensions (1 mm on each side). Based on the Rhino design, with a 40 mm sleeve height and rounded 2 mm corners at the front opening. Rounded and tapered remotes may need a fit test.

Base price: $11.99 USD. Available options may change the total; confirm the configured price on this page.

Colors: White, Cool Gray, Black.

Sizes: Samsung SolarCell — 40 × 10 mm, Apple TV — 35 × 9.25 mm, Chromecast — 38 × 18 mm, Custom dimensions.

Listed option prices: $11.99–$11.99 USD, before shipping and taxes.

Size this product to your measurements

Enter the width and thickness of your remote, including its case, where it enters the sleeve.

Enter measurements in millimeters or inches. The configurator validates the supported dimensions.

The cavity adds 2 mm to width and thickness, or 1 mm per side. Suggested remote sizes are not verified fit tests; curved or tapered bodies may need a fit check.

Read the custom dimensions guide or ask the studio about an unlisted size.